Recirculating Chillers
Sigma Aldrich Fine Chemicals Biosciences StreptaWellTM transparent
Transparent streptavidin-coated microplatesBlocked volume 300muLSA-coated area 300muL coating variance guaranteedWell geometry C
Sigma Aldrich Fine Chemicals Biosciences L alpha Phosphatdyl L ser100MG
L alpha Phosphatdyl L ser100MG
Sigma Aldrich Fine Chemicals Biosciences HS SelectR Nckel Afnt 500ML
HIS-Select(R) Nickel Affinity Gel is durable and can capture the recombinant proteins with histidine tags at a high flow rate. Recombinant proteins with histidine tags are bound using either native or denaturing conditions.
Alkali Scientific MR9610 SmartReader Microplate Reader UV-Vis
The Alkali Scientific MR9610 SmartReader™ UV-Vis Microplate Readers (models MR9610 and MR9611) have been designed with ease-of-use and fast results in mind. These instruments brings extensive capabilities to the lab bench and are designed for the busy lab with multiple users. A large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. Intuitive, 10-inch color touch screen control panel Accepts both 96 & 384-well plates Monochromator-based system• No filters required• Wavelength range from 200 to 1000 nm Stand-alone design• No PC or special software required• USB port for flash drive data transfer
Alkali Scientific Hermle Z287-A Universal Microc
The Hermle Z287-A Mircocentrifuge Plus exceeds the limitations set forth by traditional microcentrifuges which are restricted solely to fixed angle rotors for microtubes Instead this compact next generation model features an expansive line of swing out and fixed angle rotors options that accept microplates and test-tubes up to 50ml Weve designed this centrifuge to be our most compact and economical A true workhorse for any lab requiring a centrifuge that can accommodate many fields of research Along with a broad range of available rotor options the Hermle Z287-A introduces a convenient status indicator Users can easily view the current state of the centrifuge from across the room The LED illuminates to signify if the rotor is spinning the run is completed or the centrifuge is idle in standby mode Advanced microprocessor controls allow for instant rotor identification which automatically converts the rotational speed to the relevant g-force (rcf) preventing the user from setting
Enterprise Technology Solutions Industria 3-40C Ergonomic Bond
Industria 3-40C Ergonomic Bonded Leather Swivel Manager Chair Supports Up to 275 lbs 18 31 to 21 85 Seat Height Gray
Enterprise Technology Solutions by Raynor 300 Leather High-Bac
300 Leather High-Back Chair Supports Up To 250 Lb 19 57 To 22 56 Seat Height Black
Enterprise Technology Solutions Industria 3-50L Ergonomic Bond
Industria 3-50L Ergonomic Bonded Leather Swivel Manager Chair Supports Up to 275 lbs 16 81 to 20 55 Seat Height Brown
Julabo USA Inc Each, F250 recirculating chiller 250W
Chillers, Julabo, F250 Recirculating Cooler -10 to +40 °C with 250W cooling power. JULABO F Series Recirculating Coolers are a great way to replace tap water and are ideal for basic cooling tasks with 250 W to 1 kW cooling power. Models include a splash-proof membrane keypad with LED temperature display and integrated timer. Easy filling / draining with a fill level indicator and overflow port on the back. Units constructed of stainless steel and high grade plastic with stainless steel internal tank. Centrifugal pressure pump provides circulation to external application.May be used with water, water/glycol mixtures and silicone fluids.The F250 comes with 8 and 10 mm hose barbs. The F500 / F1000 come with 8 and 12 mm hose barbs.Included with each unit: 2 each barbed fittings for tubing 8 and 10 mm inner dia. (pump connections M10x1 female)
Julabo USA Inc Each, FC1600S recirculating chiller 1.55 kW
Chillers, Julabo, FC1600S Recirculating Cooler -15...+80 °C, 1.55kW cooling power; pump 22L/min to 17.4 PSI. JULABO FC units feature two separate Multi-Displays (LED) for actual and set point values. Models designated FCW are water-cooled which reduces the noise level and reduced heat generation to the laboratory environment. Units are conveniently filled from the front and have a removable venting grid.FC units feature a built-in 1.2kW heater to facilitate cooling and heating applications for temperatures from -25 °C to +80 °C with an adjustable ratio for inlet/outlet temperature. Models FC1600T and FCW2500T have a Pt100 sensor connection for external measurement and control, temperature recorder and connections for external programming. All FC units have RS232 interface with connections for standby input and alarm output. FC models supplied with 2 barbed fittings for 8 and 12 mm internal ID tubing. Pump connections M16x1 male. 230V/60Hz.
Julabo USA Inc Each, FL300 chiller, -20+40C, 0.3 kW, 115V/60Hz
Chillers, Julabo, FL300 Recirculating Cooler -20…+40 °C., 0.3 kW cooling power; ±0.5°C stability. Proportional cooling control adjusts the cooling power to the load of the application saving energy. Units incorporate RS232 interface and alarm output for PC integration and control. Models include a splash-proof membrane keypad with LED temperature display. Easy filling / draining with a fill level indicator and overflow port on the back. Units constructed of stainless steel and high-grade plastic with stainless steel internal tank. Centrifugal pressure pump. Units with 3 and 6 bar pump include internal by-pass for pressure adjustment with analog pressure gaugeMay be used with water, water/glycol mixtures and silicone fluids.The FL300, FL601, FL1201, FL1701, FLW1701 come with 8 and 12 mm hose barbs. The FLxxx3 models come with 3/4″ hose barbs. The FLxxx6 models come with 1″ hose barbs. (pump connections with M16x1 male)
Julabo USA Inc Each, FC600 recirculating chiller 0.6kW
Chillers, Julabo, FC600 Recirculating Cooler -20...+80 °C, 0.6kW cooling power; pump 20L/min to 7.3 PSI. JULABO FC units feature two separate Multi-Displays (LED) for actual and set point values. Models designated FCW are water-cooled which reduces the noise level and reduced heat generation to the laboratory environment. Units are conveniently filled from the front and have a removable venting grid.FC units feature a built-in 1.2kW heater to facilitate cooling and heating applications for temperatures from -25 °C to +80 °C with an adjustable ratio for inlet/outlet temperature. Models FC1600T and FCW2500T have a Pt100 sensor connection for external measurement and control, temperature recorder and connections for external programming. All FC units have RS232 interface with connections for standby input and alarm output. FC models supplied with 2 barbed fittings for 8 and 12 mm internal ID tubing. Pump connections M16x1 male. 230V/60Hz.
Julabo USA Inc Each, FD200 flow-through cooler 220W
Chillers, Julabo, FD200 Flow-Through Cooler +10...+30 °C. FD200 flow-through cooler is the perfect complement to open bath circulators, immersion circulators and bridge-mounted circulators extending their temperature range to below ambient temperature. It offers a small footprint, low energy requirement, and represents an economic solution preventing tap water usage for cooling. Instruments are designed for integration into an existing cooling loop (e.g. consisting of open bath circulator with pump). The FD200 flow through cooler is used for cooling a loop circuit of a closed system, the unit must be connected in the return line of a heating circulator. The compact, easy to use system is suitable for a variety of cooling applications. Simple operation with a range of +10…+30 °C with 220 W of cooling power at 20 °C.
Julabo USA Inc Each, FLW20006 chiller, -25+40C, 20 kW, 208-230V/3PPE/60Hz
Chillers, Julabo, FLW20006 Recirculating Cooler -20…+40 °C., water-cooled; 20 kW cooling power; ±0.5°C stability. Proportional cooling control adjusts the cooling power to the load of the application saving energy. Units incorporate RS232 interface and alarm output for PC integration and control. Models include a splash-proof membrane keypad with LED temperature display. Level indicator and overflow port on the back. Units constructed of stainless steel and high-grade plastic with stainless steel internal tank. Centrifugal pressure pump. Units with 3 and 6 bar pump include internal by-pass for pressure adjustment with analog pressure gaugeMay be used with water, water/glycol mixtures and silicone fluids.The FL300, FL601, FL1201, FL1701, FLW1701 come with 8 and 12 mm hose barbs. The FLxxx3 models come with 3/4″ hose barbs. The FLxxx6 models come with 1″ hose barbs. Included with each unit: 2 barbed fittings for tubing 1” ID. (pump connections with G1 1/4 male)